Return to Website

Explicit Speed Performance

Explicit Speed Performance
Start a New Topic 
Author
Comment
H23/F22 Manual Tensioner Conversion for H22A engine PARTS LIST:

Below is the Parts List if you have a H22A engine and need to search out parts to complete the conversion. I was lucky and had a F22 block handy as a spare and took most of the parts off of it since the F22/H23 block used the same manual style tensioner. All F series blocks may have the manual tensioner if it does chances are it's compatible. Only parts I had to search out that the F22 block didnt have and the H22A block required is the stud that keeps the timing belt in place from sliding off item #30 on the Honda tensioner schematic for the H23 92-96 Prelude SI non vtec model and the main washer that is 11mm approximately 40mm in diameter and 3mm in thickness item #25. There is a good write up of the install process with pictures on Honda-Tech.com from Collective Racing just search for H23 manual tensioner conversion.

Parts list:
13404-PT0-004 - ADJUSTER COMP., BALANCER BELT
13415-PT0-000 - BRACKET, BALANCER BELT ADJUSTER
14510-PT0-004 - ADJUSTER COMP., TIMING BELT
14516-PT2-000 - SPRING COMP., TIMING BELT ADJUSTER
14521-P14-A00 - PLATE, ADJUSTER
90014-P14-A00 - BOLT, TIMING BELT ADJUSTER BASE
90015-PT0-000 - BOLT, TIMING BELT ADJUSTER SPRING
90016-PT0-000 - BOLT, TIMING BELT ADJUSTER
90140-P14-A00 - WASHER, PLAIN (11MM)

Here is a link for the parts list:
http://www.hondaautomotivepart...82%29